THE EFFECT OF ROBUSTA COFFEE ON THE COLOR STABILITY OF THERMOPLASTIC NYLON DENTURE BASE

Authors

  • Darma Tsari Faizah Dentistry Study Program, Faculty of Medicine, Universitas Sriwijaya, Palembang, Indonesia
  • Sri Wahyuningsih Rais 2Dept of Prosthodontic, Dentistry Study Program, Faculty of Medicine, Universitas Sriwijaya, Palembang, Indonesia
  • Martha Mozartha 3Dept of Biomaterial, Dentistry Study Program, Faculty of Medicine, Universitas Sriwijaya, Palembang, Indonesia

Abstract

Introduction: Thermoplastic nylon is a flexible denture base material known for its excellent esthetics, making it a viable alternative for patients allergic to residual monomers or metals. However, its high water absorption rate may compromise color stability, a critical property for clinical longevity. Robusta coffee, a widely consumed beverage in South Sumatra, contains high concentrations of chromogenic agents that potentiallly induce significant staining. Aim: This study aimed to evaluate the effect of robusta coffee immersion and duration on the color stability of thermoplastic nylon denture base. Methods: This laboratory experimental study employed a pretest–posttest control group design. Thirty-two thermoplastic nylon specimens (20 × 3 mm) were divided into eight groups (n=4) and immersed in either robusta coffee or distilled water for 1, 3, 5, and 7 days. Color changes were quantified using a colorimeter. Data were analyzed using paired t-test, one-way ANOVA, and post hoc LSD tests ). Result: The paired t-test revealed significant changes in lightness (∆L) accross all groups(p<0.05. The highest mean color change (∆E) occurred in the 7-day robusta coffee immersion group (mean = 14.25), while the lowest was observed in the the 1-day distilled water group (mean = 9.68). Conclusion: Immersion in robusta coffee significantly affects the color stability of thermoplastic nylon. Furthermore, increased immersion duration correlates with a higher degree of discoloration.      

References

The Glossary of Prosthodontic Terms. The Journal

of Prosthetic Dentistry. 2017. 117:1–105.

Wahyuni S, Wijaya WP. Pengaruh penambahan

bahan kompatibilisasi pada nilon daur ulang

terhadap kekuatan fleksural basis gigi tiruan nilon

termoplastik. Bdent. 2019;6(1):42–8.

Binaljadm TM. Flexible denture: a literature

review. Cureus. 2024;16(3):1–10.

Vojdani M, Giti R. Polyamide as a denture base

material: a literature review. J Dent (Shiraz).

;16(1):1–9.

Ariyani A, Nasution ID, Agusnar H. Effect of

thermocycling and E-glass fiber addition on water

sorption and color stability of thermoplastic

nylon denture base material. IOSR.

;15(08):41–8.

Dimitrova M, Corsalini M, Kazakova R, Vlahova

A, Barile G, Dell’Olio F, et al. Color stability

determination of CAD/CAM milled and 3D

printed acrylic resins for denture bases: a narrative

review. J Compos Sci. 2022;6(7):201.

Wahyuni S, Ricca C. Pengaruh minuman teh pada

pemakai basis gigi tiruan nilon termoplastik

terhadap penyerapan air dan stabilitas warna. J

Ked Gi Unpad. 2020;32(1):66–71.

Widaningsih R. Outlook komoditas perkebunan

kopi [Internet]. Pusat Data dan Informasi

Pertanian Sekretariat Jendral Kementrian

Petanian; 2022. p11. Available from:

https://satudata.pertanian.go.id/details/

publikasi/354

Safitri R, Ramadani E, Oceani FP, Tanziha I.

Multidimensional Analysis of Changing Eating

Habits: Understanding the Coffee Shop

Phenomenon in Indonesia. Media Gizi Indonesia.

Jan 30;20(1):1–11.

Kasuma N, Putri YG, Lipoeto I. Pengaruh larutan

kopi bubuk robusta terhadap stabilitas warna pada

resin akrilik polimerisasi panas. Bdent.

;2(1):23–8.

Aditya I, Nocianitri K, Yusasrini N. Kajian

kandungan kafein kopi bubuk, nilai pH dan

karakteristik aroma dan rasa seduhan kopi jantan

(pea berry coffee) dan betina (flat beans coffee)

jenis arabika dan robusta. Jurnal ITEPA.

;5(1):1–12.

Rusyida DN, Arifin R, Nahzi MYI. The immersion

effect of 50% kasturi (mangifera casturi) leaf

extract on color changes of thermoplastic nylon

denture base. Dentino. 2023;8(1):6–10.

Nasution FAR, Tarigan S, Wahyuni S. Pengaruh

perendaman larutan ekstrak pandan wangi

(pandanus amaryllifolius roxb.) sebagai pembersih

pada bahan basis gigi tiruan nilon termoplastik

terhadap stabilitas warna: studi experimental.

Padjadjaran Journal of Dental Researchers and

Students. 2024;8(3):322–9.

Song SY, Kim KS, Lee JY, Shin SW. Physical

properties and color stability of injection-molded

thermoplastic denture base resins. J Adv

Prosthodont. 2019;11(1):32–40.

Hidayat R, Indrastuti M, Kusuma HA, Saleh S.

The effect of Tio2 coating and coffee immersion

on discoloration of thermoplastic nylon denture

base. Majalah Kedokteran Gigi Indonesia.

;4(3):161–6.

Arifin R, Putri VO, Dewi RK. The Color Change

Effect of Thermoplastic Nylon After Immersion in

% Kelakai (Stenochlaena Palustris) Leaf

Extract. Dentino. 2024;9(1):1–6.

Banu F, Athiramathy V, S S, V A, Jeyapalan K.

Comparative Evaluation of Color Stability of

Different Permanent Denture Base Materials: An

In Vitro Study. Cureus. 2020 Jan 22;12(1):e6698.

doi: 10.7759/cureus.6698

Jarwan RK. Dental Staining Associated with

Various Types of Coffee. Journal of Research in

Medical and Dental Science. 2022;10(9).

Peracini A, Regis RR, Souza RF, Pagnano VO,

Silva CH, Paranhos HF. Alkaline Peroxides

Versus Sodium Hypochlorite for Removing

Denture Biofilm: a Crossover Randomized Trial.

Braz Dent J. 2016 Oct-Dec;27(6):700-704. doi:

1590/0103-6440201600913.

Suhaimi FM, Mubarak MF, Roslan H, Razak

NAA, Omar AF. The effect of coloured beverages

on the colour stability of a flexible denture.

Malaysian Journal of Medicine & Health Sciences.

;15(9):109–15.

Downloads

Published

2026-07-31

Issue

Section

Original Research