General information
- The author should register as an author in HEME: Health & Medical Journal in this link: https://jurnal.unbrah.ac.id/index.php/heme/user/register before submitting and upload the manuscript.
- The author of the manuscript is liable for the content of the published manuscript.
- Submitted manuscript and suplementary files which consist of research ethical clearence and manuscript authenticity sheets(can be downloaded here) and Must Attach a Maximum of 25% Plagiarism Results using turniting similarity check (uploaded at the time of submission in the Step 4 section of the supplementary file)
- All forms of communication should be electronically based.
- The manuscript should be written in English or in Indonesian and has never been published in any journal.
- The manuscript could be in the form of research, case report or literature review.
- The manuscript should be in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format (don’t use another format)
- The writing template can be downloaded on the website of HEME: Health & Medical Journal
- The maximum page number for manuscript is 12 pages (excluding references)
- For further information, please contact:HEME: Health & Medical Journal, Jl. Raya By Pass Km 15, Aie Pacah – Padang, Sumatera Barat, Phone: 085274557580; e-mail: heme@unbrah.ac.id
- Each author is required to fill in metadata, one of which is the orchid id
Preparation of Papers for Health & Medical Journal
Title
The title should be no more than 12 words (English) or 15 words (in Indonesian), describing the entire contents of the manuscript without acronym or abbreviation. Letters are typed in Times New Roman font 24 with capital letters in front of the word
Author information. Including author(s) name without any title, affiliation, city and nation. address and corresponding e-mail
Abstract
The abstract should exceed 250-300 words. It should briefly summarize the essence of the paper and address the following areas without using specific subsection titles:
Background: contains the things that underlie this research, build gap analysis
Objective: Briefly state the problem or issue addressed, in language accessible to a general scientific audience.
Method: Briefly summarize the technological innovation or method used to address the problem.
Results: Provide a brief summary of the results and findings.
Conclusions: Give brief concluding remarks on your outcomes.
Keyword : important words in this research
I. Introduction
This document is a template for Microsoft Word versions 6.0 or later. If you are reading a paper or PDF version of this document, please download the electronic file from the Open Journal System (OJS) HEME (Health & Medical Journal) Website at jurnal.unbrah.ac.id/index.php/heme/index so you can use it to prepare your manuscript.
When you open the template, select “Page Layout” from the “View” menu in the menu bar which allows you to see the footnotes. Then, type over sections of the template or cut and paste from another document. Do not change the font sizes or line spacing to squeeze more text into a limited number of pages. Use italics for emphasis; do not underline. To insert images in Word, position the cursor at the insertion point and either use Insert | Picture | From File or copy the image to the Windows clipboard and then Edit | Paste Special | Picture (with “float over text” unchecked).
II. Procedures For Paper Submission
A. Review Stage
Please submit your manuscript electronically for review. When you submit your final version (after your paper has been accepted), send your final manuscript via OJS Web manuscript submission system.
Also, send a sheet of paper or PDF with complete contact information for all authors. Include full mailing addresses, telephone numbers, fax numbers, and e-mail addresses. This information will be used to send each author a complimentary copy of the journal in which the paper appears. In addition, designate one author as the “corresponding author.” This is the author to whom proofs of the paper will be sent. Proofs are sent to the corresponding author only.
B. Figures
Format and save your graphic images using a suitable graphics processing program that will allow you to create the images.
Fig. 1. Ct image simulation of sagittal, cortical and axial pieces with residive mass on the vaginal punctum (red). Note that “Fig.” is abbreviated. There is a period after the figure number, followed by two spaces. It is good practice to explain the significance of the figure in the caption.
C. Copyright Form
An HEME (Health & Medical Journal) copyright form should accompany your final submission. You can get a .pdf, or .doc version at ojs.unbrah.ac.id. Authors are responsible for obtaining any security clearances.
D. Tables
Table I. format can be seen as the following.
III. MATH
If you are using Word, use either the Microsoft Equation Editor or the MathType add-on (http://www.mathtype.com) for equations in your paper (Insert | Object | Create New | Microsoft Equation or MathType Equation). “Float over text” should not be selected.
V. Helpful Hints
A. Figures and Tables
Large figures and tables may span both columns. Place figure captions below the figures; place table titles above the tables. If your figure has two parts, include the labels “(a)” and “(b)” as part of the artwork. Please verify that the figures and tables you mention in the text actually exist. Use the abbreviation “Fig.” even at the beginning of a sentence. Do not abbreviate “Table.” Tables are numbered with Roman numerals.
Figure axis labels are often a source of confusion. Use words rather than symbols. As an example, write the quantity “Magnetization,” or “Magnetization M,” not just “M.” Put units in parentheses. Do not label axes only with units. As in Fig. 1, for example, write “Magnetization (A/m)” or “Magnetization (Axm-1),” not just “A/m.” Do not label axes with a ratio of quantities and units. For example, write “Temperature (K),” not “Temperature/K.”
Multipliers can be especially confusing. Write “Magnetization (kA/m)” or “Magnetization (103 A/m).” Do not write “Magnetization (A/m) ´ 1000” because the reader would not know whether the top axis label in Fig. 1 meant 16000 A/m or 0.016 A/m. Figure labels should be legible, approximately 8 to 12 point type.
B. References
Literature as many as 20 articles published in the last 10 years
[1] G. O. Young, “Synthetic structure of industrial plastics (Bo gwok style with paper title and editor),” in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.
[2] H. Poor, An Introduction to Signal Detection and Estimation. New York: Springer-Verlag, 1985, ch. 4.
[3] E. H. Miller, “A note on reflector arrays (Periodical style—Accepted for publication),” IEEE Trans. Antennas Propagat., to be published.
[4] J. Wang, “Fundamentals of erbium-doped fiber amplifiers arrays (Periodical style—Submitted for publication),” IEEE J. Quantum Electron., submitted for publication.
[5] Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electron spectroscopy studies on magneto-optical media and plastic substrate interfaces (Translation Journals style),” IEEE Transl. J. Magn.Jpn., vol. 2, Aug. 1987, pp. 740–741 [Dig. 9th Annu. Conf. Magnetics Japan, 1982, p. 301].
[6] J. Jones. (1991, May 10). Networks (2nd ed.) [Online]. Available: http://www.atm.com
[7] (Journal Online Sources style) K. Author. (year, month). Title. Journal [Type of medium]. Volume(issue), paging if given. Available: http://www.(URL)
[8] R. J. Vidmar. (1992, August). On the use of atmospheric plasmas as electromagnetic reflectors. IEEE Trans. Plasma Sci. [Online]. 21(3). pp. 876–880. Available: http://www.halcyon.com/pub/journals/21ps03-vidmar
C. Abbreviations and Acronyms
Define abbreviations and acronyms the first time they are used in the text, even after they have already been defined in the abstract. Abbreviations such as SI, ac, and dc do not have to be defined. Abbreviations that incorporate periods should not have spaces: write “C.N.R.S.,” not “C. N. R. S.” Do not use abbreviations in the title unless they are unavoidable.
D. Equations
Number equations consecutively with equation numbers in parentheses flush with the right margin, as in (1). First use the equation editor to create the equation. Then select the “Equation” markup style. Press the tab key and write the equation number in parentheses. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Use parentheses to avoid ambiguities in denominators. Punctuate equations when they are part of a sentence, as in
b ≤ 5 (1)
Be sure that the symbols in your equation have been defined before the equation appears or immediately following. Italicize symbols (T might refer to temperature, but T is the unit tesla). Refer to “(1),” not “Eq. (1)” or “equation (1),” except at the beginning of a sentence: “Equation (1) is ... .”
E. Other Recommendations
Use one space after periods and colons. Hyphenate complex modifiers: “zero-field-cooled magnetization.” Avoid dangling participles, such as, “Using (1), the potential was calculated.” [It is not clear who or what used (1).] Write instead, “The potential was calculated by using (1),” or “Using (1), we calculated the potential.”
Use a zero before decimal points: “0.25,” not “.25.” Use “cm3,” not “cc.” Indicate sample dimensions as “0.1 cm ´ 0.2 cm,” not “0.1 ´ 0.2 cm2.” The abbreviation for “seconds” is “s,” not “sec.” Do not mix complete spellings and abbreviations of units: use “Wb/m2” or “webers per square meter,” not “webers/m2.” When expressing a range of values, write “7 to 9” or “7-9,” not “7~9.”
A parenthetical statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (A parenthetical sentence is punctuated within the parentheses.) In American English, periods and commas are within quotation marks, like “this period.” Other punctuation is “outside”! Avoid contractions; for example, write “do not” instead of “don’t.” The serial comma is preferred: “A, B, and C” instead of “A, B and C.”
If you wish, you may write in the first person singular or plural and use the active voice (“I observed that ...” or “We observed that ...” instead of “It was observed that ...”). Remember to check spelling. If your native language is not English, please get a native English-speaking colleague to carefully proofread your paper.
VI. Editorial Policy
Do not submit a reworked version of a paper you have submitted or published elsewhere. Do not publish “preliminary” data or results. The submitting author is responsible for obtaining agreement of all coauthors and any consent required from sponsors before submitting a paper. Heme ( Health & Medical Journal) strongly discourage courtesy authorship. It is the obligation of the authors to cite relevant prior work.
At least two reviews are required for every paper submitted. For conference-related papers, the decision to accept or reject a paper is made by the editors and publications committee; the recommendations of the referees are advisory only. Undecipherable English is a valid reason for rejection. Authors of rejected papers may revise and resubmit them to the HEME (Health & Medical Journal) as regular papers, whereupon they will be reviewed by two new referees.
VII. Publication Principles
The contents of HEME (Health & Medical Journal) are peer-reviewed and archival.
Authors should consider the following points:
Technical papers submitted for publication must advance the state of knowledge and must cite relevant prior work, the paper length is maximum 8 pages.
The length of a submitted paper should be commensurate with the importance, or appropriate to the complexity, of the work. For example, an obvious extension of previously published work might not be appropriate for publication or might be adequately treated in just a few pages.
Authors must convince both peer reviewers and the editors of the scientific and technical merit of a paper; the standards of proof are higher when extraordinary or unexpected results are reported.
Because replication is required for scientific progress, papers submitted for publication must provide sufficient information to allow readers to perform similar experiments or calculations and use the reported results. Although not everything need be disclosed, a paper must contain new, useable, and fully described information. For example, a specimen’s chemical composition need not be reported if the main purpose of a paper is to introduce a new measurement technique. Authors should expect to be challenged by reviewers if the results are not supported by adequate data and critical details.
Papers that describe ongoing work or announce the latest technical achievement, which are suitable for presentation at a professional conference, may not be appropriate for publication in a JKB (Jurnal Kedokteran Baiturrahmah)
VIII. Conclusion
Please include a brief summary of the possible clinical implications of your work in the conclusion section. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. Consider elaborating on the translational importance of the work or suggest applications and extensions.
Appendix
Appendixes, if needed, appear before the acknowledgment.
Acknowledgment
The preferred spelling of the word “acknowledgment” in American English is without an “e” after the “g.” Use the singular heading even if you have many acknowledgments. Avoid expressions such as “One of us (S.B.A.) would like to thank ... .” Instead, write “F. A. Author thanks ... .” Sponsor and financial support acknowledgments are placed in here.
References
Literature as many as 20 articles published in the last 10 years. Authors are asked to use Mendeley as a reference manager with a style that can be downloaded from Mendeley Desktop with this link : https://csl.mendeley.com/styles/18616731/vancouver-heme
[1] G. O. Young, “Synthetic structure of industrial plastics (Book style with paper title and editor),” in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.
[2] H. Poor, An Introduction to Signal Detection and Estimation. New York: Springer-Verlag, 1985, ch. 4.
[3] E. H. Miller, “A note on reflector arrays (Periodical style—Accepted for publication),” IEEE Trans. Antennas Propagat., to be published.
[4] J. Wang, “Fundamentals of erbium-doped fiber amplifiers arrays (Periodical style—Submitted for publication),” IEEE J. Quantum Electron., submitted for publication.
[5] Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electron spectroscopy studies on magneto-optical media and plastic substrate interfaces (Translation Journals style),” IEEE Transl. J. Magn.Jpn., vol. 2, Aug. 1987, pp. 740–741 [Dig. 9th Annu. Conf. Magnetics Japan, 1982, p. 301].
[6] J. Jones. (1991, May 10). Networks (2nd ed.) [Online]. Available: http://www.atm.com
[7] (Journal Online Sources style) K. Author. (year, month). Title. Journal [Type of medium]. Volume(issue), paging if given. Available: http://www.(URL)
[8] R. J. Vidmar. (1992, August). On the use of atmospheric plasmas as electromagnetic reflectors. IEEE Trans. Plasma Sci. [Online]. 21(3). pp. 876–880. Available: http://www.halcyon.com/pub/journals/21ps03-vidmar
Health and Medical Journal This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.