DIGITALLY DESIGNED PERIODONTAL PROTHESE SWING LOCK DENTURE : A CASE REPORT
DOI:
https://doi.org/10.33854/jbd.v10i1.1252Keywords:
removable partial denture, resin-milling, swing-lock dentureAbstract
Introduction: Swing-lock framework partial removable denture is an option used as splinting in cases where there is several mobility teeth. The purpose of these periodontal prostheses was to help stabilize the teeth as adjuvant therapy. Swing-lock denture has more difficult construction and digital dentistry facilitates the fabrication process of swing-lock dentures by burn-out resin milling model making technique. Aim : This article was aimed to describe step by step how to make swing-lock partial denture with the help of digital design. Case report: a56 year old woman came to dental practice as she complained discomfort in old denture. In clinical condition it is found complete loss in upper jaw dan partial loss in low jaw with several mobility teeth. Complete denture was made in upper jaw and swing-lock partial denture in lower jaw using burn-out resin milling method that obtained through digital process. Conclusion: Swing-lock partial denture is a effective prostheses to achieve optimal function in difficult cases. Burn-out resin milling technique facilitate the process of fabricating swing-lock dentureReferences
Wahjuni, S., Mandanie, S.A., 2017, Fabrication Of Combined Prosthesis With Castable Extracoronal Attachment (Laboratory Procedure), Jour.Voc.HS, 1(2): 75-81.
Mangundap, G.C.M., Wowor, V.N.S., Mintjelungan, C.N., 2019, Efektivitas Penggunaan Gigi Tiruan Sebagian Lepasan Terhadap Fungsi Pengunyahan Pada Masyarakat Desa Pinasungkulan Kecamatan Mondoinding. Jurnal e-Gigi, 7(2): 81-86.
Lenggogeny, P., Masulili, S.L.C., 2015. Gigi Tiruan Sebagian Kerangka Logam sebagai Penunjang Kesehatan Jaringan Periodontal. Majalah Kedokteran Gigi Indonesia, 1(2): 123-129.
Rachmawati, R., Masulili, C., Masulili, S.L.C., Tadjoedin, F., Sukardi, I., 2011., Gigi Tiruan Sebagian Kerangka Logam Sebagai Splint Permanen Pada Penderita Penyakit Periodontal. Dentofasial, 10(3): 169-174.
Jenny N., Singh P.D., 2017., Swing-lock denture: a review article. Int J Dent Health, 4(5):1255-61.
Lynch, C.D., Allen P.F, 2004. The swing-lock denture : its use in conventional removable partial denture prosthodontics. Dent Update, 31(9): 506–8.
Chan, Martin F.MY., Adams D., Brudvik J. S., 1998. The swing-lock removable partial denture in clinical practice. Dent Update, 25 :80-4.
Bolender C.L, Curtis C.M., 1981. Swinglock removable partial denture : where and when. J of Prosth Dent 45(1):4-10.
Schulte JK., Smith DE., 1980. Clinical evaluation of swinglock removable denture. J of Pros Dent 44(6):595-603.
Geramy A., Adibrad M., Sahabi M. 2010. The effects of splinting periodontally compromised removable partial denture abutments on bone-stresses : a three- dimensional finite element study. J Dent Sci 5(1):1-7.
Becker, CM., Bolender, CL., 1981. Designing swing-lock partial dentures. J of Pros Dent 46(2):126-32.
McKenna G., Allen PF., Ziada H. 2013. Prosthodontic rehabilitation of a patient using swing-lock lower denture after segmental madibulectomy. Eur J Prosthodont Rest Dent 21(13):141-4.
Malik MHA, Yazdania N, 2021.Perio-prosthodontics considerations in removable partial denture : the role of the prosthodontist. J Pak Dent Assoc 2021;30(3):219-27.
Maryod, W.H., Taha, E.R. 2019. Retention of Removable Partial Denture Fabricated by Digital Designing and 3D Printing Technology - A Cross Over Study. Adv Dent & Oral Health 10(3): 555789.
Persson AS, Oden A, Andersson M. 2009. Digitization of simulated clinical dental impressions: virtual three-dimensional analysis of exactness. Dent Mater 25(7): 929-36.
El-Khamisy NE, Habib AH, El- Mekawy NE, Emera RM. 2017. Digital versus Conventional Design For Mandibular Distal Extension RPD: A Study of Passivity of RPD Components and Principal Abutment Alveolar Bone Height Changes. MJD 4(14): 6-13.
Cindy B, Guillaume B, Pascal B, Yannick G, Marion B, et al. 2017. )Optical Impression and Removable Partial Denture: An Accurate and Actual Solution. J Dent Oral Health 3(6): 1-4.
Han J, Wang Y, Lü P. 2010. A preliminary report of designing removable partial denture frameworks using a specifically developed software package. Int J Prosth 23(4): 370-375.
Gan N, Ruan Y, Sun J, Xiong Y, Jiao T. 2018. Comparison of adaptation between the major connectors fabricated from intraoral digital impressions and extraoral digital impressions. Sci Rep 8(1):529.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
