PENGARUH PENAMBAHAN BAHAN KOMPATIBILISASI PADA NILON DAUR ULANG TERHADAP KEKUATAN FLEKSURAL BASIS GIGI TIRUAN NILON TERMOPLASTIK
Abstract
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Carr AB, Brownman DT, McCracken’s Removable Partial Prosthodontics, 12th ed, Elsevier, Canada, 2011: 103.
Togatotop RS, Rumampuk JF, Wowor VNS. Pengaruh perendaman plat resin akrilik dalam larutan kopi dengan berbagai kekentalan terhadap perubahan volume larutan kopi. e-Gigi 2017; 5(1): 19-23.
Singh JP, Dhiman RK, Bedi RPS, Girish SH. Flexible denture base material: A viable alternative to conventional acrylic denture base material. Contemp Clin Dent 2011; 2(4): 313-7
Shanmur SN, Jagadeesh KN, Kalavathi SD, Kashinath KR. “ Flexible dentures” – an alternate for rigid dentures?. IJDSR 2010; 1:74-79.
Gomes SGF, Cury AADB. Flexible resin: an esthetic option for partially edentulous patients. Rev Gaucha Odontol 2014;63(1):81-86. Gomes SGF, et al. Flexible resin: an esthetic option for partially edentulous patients. Rev Gaucha Odontol 2014;63(1):81-86.
Kohli S, Bhatia S. Flexural properties of polyamide versus injection-molded polymetacrylate denture base materials. Eur J Prosthodont 2013; 23(3): 6-10
Wang L, D’Alpino PHP, Lopes LG, Pereira JC. Mechanical properties of dental restorative materials: relative contribution of laboratory tests. J Appl 2003; 11(3): 162-167
Mozarta M, Herda E, Soufyan A. Pemilihan resin komposit dan fiber untuk meningkatkan kekuatan fleksural fiber reinforced composite (FRC). J PDGI 2010; 59(1): 29-34.
Sakaguchi RL, Powers JM. Craig’s restorative dental material. 13th ed. Philadelphia :Elsevier 2012: 45-50.
Sharma A, Shashidhara HS. A review: Flexible removable partial dentures. IOSR-JDMS 2014; 13: 58-62.
Singh K, Gupta N. Injection molding technique for fabrication of flexible prosthesis from flexible thermoplastic denture base materials. WJD 2012; 192: 532-538.
Soja J, Miskolczi N. Degradation of reinforced and unreinforced waste polyamides during mechanical recycling. HJIC 2013; 41(2): 131-136.
Meyabadi TF, Mojtahedi MMR, Shoustari MSA. Melt spinning of reused nylon 6: structure and physical properties of as-spun, drawn, and textured filaments. J Text I 2010; 101(6): 527-537.
Crespo JE, Parres F, Peydro MA, Navarro R. Study of rheological, thermal, and mechanical behavior of reprocessed polyamide 6. Polym Eng Sci 2012: 1-10
Hamanaka I, Iwamoto M, Lassila L, Vallittu P, Shimizu H, Takakashi Y. influence of water sorption on mechanical properties of injection-molded thermoplastic denture base resin. Acta Odontol Scand 2014: 1-7
Bucella M, Dorigato A, Pasqualini E. Thermo-mechanical properties of polyamide 6 chemically modified by chain extension with polyamide/ polycarbonate blend. J Polym Res 2012: 1-9.
Takabayashi Y. Characteristics of denture thermoplastic rsins for non-metal clasp dentures. Dent Mater J 2010; 29(4): 353-61.
DOI: https://doi.org/10.33854/jbd.v6i1.129
DOI (PDF (Bahasa Indonesia)): https://doi.org/10.33854/jbd.v6i1.129.g171
Refbacks
- There are currently no refbacks.
Copyright (c) 2019 B-Dent, Jurnal Kedokteran Gigi Universitas Baiturrahmah
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.